Ir para o conteúdo principal

Repair and disassembly information for Google's Pixel 7 Pro smartphone, released in October 2022. Identified by model number GP4BC and GE2AE.

94 Perguntas Visualizar todos

Forgot blue film inside after screen assembly

Hi, I'm a stupid person who should've probably not tried to have repaired my own relatively new pixel 7 pro. I failed reassembly once by putting the glue on a part of the screen I forgot to remove. Had to wait an extra week for new glue for my new screen and after a nerve wrecking time attempting reassembly for the second time, I messed up again. I just woke up with memory flashbacks of me keeping one of the blue films on the inside of the screen, to temporarily protect it while reconnecting the screen cable. In my enthousiasm I just closed the phone up without removing it.

Do I have to worry? Can this melt and mess up the entire inside of my phone?

I'm terrified of reopening the phone as I don't wanna destroy this screen too.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário

1 resposta

You need to take it back apart, remove the film and reassemble because most likely your touch will not work.

Esta resposta foi útil?

Pontuação 0

2 comentários:

My touch works fine. Everything works fine. I'm just worried for the inside of the phone to get hot enough that the plastic will melt or something.

por

That could possibly be one the case. If it were me I think I would take the phone apart and take it out.

por

Adicionar um comentário

Adicionar a sua resposta

Chan será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 51

Duração total: 1,064