Conserte seus objetos Comunidade Loja

The Mac mini family was first introduced in January of 2005.

1251 Perguntas Visualizar todos

Opções

Connector of fan on Logic Board broke off - what now?

Hello,

I was busy with replacing my hard drive with an SSD. Did all the steps successfully, except for reconnecting the fan to the logic board. I tried to reconnect it, but didn't manage to do it. I asked my father to give it a try, but he came back with the broken off connector in his hand.

I have an A1347, but I think it's pretty generic. Does anyone know if I can resolder it back, or do I have to declare my Mac Mini as a door stop now?

Thanks,

Jeffrey

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação -1
Adicionar um comentário

2 respostas

Filtrar por:
Mais úteis Mais recentes Mais antigas
Solução escolhida

Opções

Soldering logic boards is not for DIY requires special tools, solder. Electronics shop MAY be able to help - if not.... new logic board if it's worth the expense.

If this Answer is helpful please remember to return and mark it Accepted.

Esta resposta foi útil?

Sim Não
Pontuação 1
Adicionar um comentário

Opções

That depends on your soldering skills. I solder things like that and smaller everyday. You can also solder the wires directly to the board - not recommended. Some pictures of what you have there of both the board and connector would be helpful in telling you if the 2 can be mated again, if you need new or if this is a job for a professional. Replacement of the logic board shouldn't be considered unless the repair exceeds the cost of replacement.

Esta resposta foi útil?

Sim Não
Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

Jeffrey será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 995