So I'm trying to replace my battery on a samsung galaxy s7 and the back panel still won't come off even after blisteringly hot heat from a hairdryer. Is there any way I can use something other than heat to help get the adhesive off?
Esta é uma boa pergunta?
You will need a tool to remove the back working round the edges the glue that holds it is all round the edges and in the middle and if you have not done this before it will probably break it a repleacement in cheap
Esta resposta foi útil?
Rep: 783,9 mil
1,1 mil
894
2,3 mil
@esaiboatrig2973 you need the back to be at about 140 deg F for the adhesive to soften. I would suggest either a heat gun and a good thermometer, or a hot plate to accomplish this. The heat has to be consistent and even. cover your camera while you heat it. use something like this tool iSesamo Opening Tool|Shopping|MiscTools}&pk_source=google&pk_medium=cpc&pk_kwd=&gclid=Cj0KCQjwiIOmBhDjARIsAP6YhSX_AFLzLeDUcSLLQHJm75sCh4BrDZLdEUAlUFBvy7XLJh-yBF9631UaApEwEALw_wcB and leep reapplying the heat. Yes, do wear some gloves since it will be unpleasant to hold your phone while doing this.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 2
Últimos 30 dias: 4
Duração total: 44
@esaiboatrig2973 are you referring to the back glass? Has it ever been disassembled before? Any change in adhesive?
por oldturkey03
@oldturkey03 Yes I am reffering to that. It's never been dissassembled.
por Esai Boatright (topdogman)