Conserte seus objetos Comunidade Loja

A1418 | EMC 2889 | Late 2015 | 1.6 GHz dual-core Intel Core i5 or 2.8 GHz quad-core Intel Core i5. Released October 13, 2015.

47 Perguntas Visualizar todos

Opções

Black screen for 5 minutes after replacing hdd with ssd

Hi,

After installing new sata ssd my imac boots with black screen. It stays like that for 5 minutes and then login screen appears. No apple boot logo or error or progress bar. Straight black screen(without back light)and then straight to login screen. I can hear chime and usb has power. All diagnostic leads lights up. If I let it sleep or restart computer it again takes 5 minutes to light up screen.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0
Adicionar um comentário

2 respostas

Filtrar por:
Mais úteis Mais recentes Mais antigas

Opções

Do you have other boot disks connected? (USB installer, your old drive, etc…). I have seen this occur before when it’s trying to identify all the other boot drives

Esta resposta foi útil?

Sim Não
Pontuação 0

2 comentários:

Nothing else is connected to my imac. I think this may be related to temperature sensor. As ifixit kit for a1418 has an adapter with builtin temp sensor. But no way to test it

por

@kamilzurel94091 Is the fan running very heavily? If not, it’s unlikely to be an issue with a thermal sensor. But I see where your thinking is going. What version of macOS are you running? Also, was your Mac one that has a Fusion Drive, or it just had the HDD?

por

Adicionar um comentário

Opções

@kamilzurel94091 - I doubt the issue is a thermal sensor.

But! You could have a simple problem. Let’s do this in a dim room do you see a dim glow? Also try a lit flashlight resting on the screen at a sharp angle, do you see a faint image of your desktop and its icons?

Esta resposta foi útil?

Sim Não
Pontuação 0

7 comentários:

No image on screen with flashlight

por

@kamilzurel94091 - Do you see a glow in a dim room from the display?

por

No. Display is dead for 5 minutes from start and then login screen appears and everything is working

por

@kamilzurel94091 - What I was trying to do was to get us a data point to help us focus. There are two circuits at play here, the backlight and the creation of the image to the display.

As we know the image does show up we have to assume the display is working. But we still don’t know which part isn’t.

So if I flip a coin here I would guess the backlight is failing Vs the T-CON, but that’s just an educated guess!

por

@kamilzurel94091 - Had another thought! Check the NV-RAM battery! I suspect it might be dead. What happens is the system has to reconfigure it’s self when the settings are lost so that could explain the delay.

This often happens when you use a switched power outlet as the vampire power from the line is not present so the battery is used. The outlet the system is plugged into could also have a sensor to prevent the power drain some outlet strips offer this feature.

por

Exibir mais 2 comentários

Adicionar um comentário

Adicionar a sua resposta

Kamil Zurel Pawlak será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 66