Conserte seus objetos Comunidade Loja

The March 2015 update of Apple's 13" MacBook Pro Retina Display, model A1502, features fifth-generation Intel Core i5 and i7 processors and introduces the Force Touch trackpad.

1187 Perguntas Visualizar todos

Opções

How to fix loud noise after making a small dent on my keyboard

Block Image

So something heavy accidentally fell on my keyboard . I have uploaded photo and videos to explain the area and demo of the noise . So after the impact this noise started and I can hear it change when I lift my MacBook . I suspect it's the fan since it gets worse as the computer heats and only starts after I open few applications . Moving my MacBook effects the noise it makes . Please help fix this . It's very annoying . I also asked a friend to open my MacBook and have a look at the fan but it was spinning fine without making any noise so . Both were very confused .

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0
1 comentário

It's weird I had to post this question again since my last one got deleted on it's own . Please help me fix this issue, Apple support just asks me to get a new MacBook

por

Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas
Pergunta mais útil

Opções

I checked the teardown of your computer (MacBook Pro 13" Retina Display Early 2015 Teardown), and noticed that the fan is right below the dent. That means it is probably the fan that is making the noise. You said you opened the computer and there was no noise. My theory is that when you opened the case, you relieved the pressure the dent was putting on the fan, allowing it to spin properly. If that is the case, replacing the fan won't do much. You could try replacing the whole upper case (Substituição da estrutura superior do MacBook Pro 13" com tela Retina do início de 2015), however this is an extremely complicated repair. If you feel like you can do it, and don't have much to lose, then go for it! This will replace the part with the dent, so the fan can spin freely. Let us know how it goes!

Good luck!

Imagem de MacBook Pro 13" Retina Display Early 2015

Guia

MacBook Pro 13" Retina Display Early 2015 Teardown

Nível de dificuldade:

Moderada
Imagem de MacBook Pro 13" Retina Display Early 2015 Estrutura superior

Guia

Substituição da estrutura superior do MacBook Pro 13" com tela Retina do início de 2015

Nível de dificuldade:

Difícil

—

3 hours

Esta resposta foi útil?

Sim Não
Pontuação 1

2 comentários:

Yea, we tried to remove the fan to check if it was broken , but we could spin it without any problem without hearing any noise . So I guess the fan is ok something else must be creating issue for the fan

por

My guess is that the problem part dented upper case, unless the bottom cover is dented too. The upper case is the part on the top of the computer that has the palm rests, keyboard, and trackpad. Unfortunately, this part is very hard to replace.

por

Adicionar um comentário

Adicionar a sua resposta

Hitesh será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 4

Duração total: 56