Ir para o conteúdo principal

Updated Apple TV with second generation A5 processor / Released March 7, 2012

32 Perguntas Visualizar todos

PSU pinout for Apple TV 3rd generation

This is a very specific question, but I hope you can help me out.

I need to figure out what the pinnout of the PSU connector is. The unit itself can be bought, but there are no documents. Also board diagrams are impossible to find.

S/N: ADP-6BF S/ OT9031

https://de.aliexpress.com/item/100500341...

thank you for any help.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Pergunta mais útil

Have you just probed the board connector to measure things. You basically have two sets of wires for the positive and negative (ground) sides as well as a pair of wires for the power enable.

Using an Ohm meter you should be able to isolate the lines.

Esta resposta foi útil?

Pontuação 1

1 comentário:

Since the ATV doesn't se over 15 W at peak, I'm converting mine to USB C. Thx for the fast reply. I'm mostly interested in the V coming over each wire, so that I design my usb-c power distribution pcb correctly.

por

Adicionar um comentário

Adicionar a sua resposta

usbc será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 3

Duração total: 64