Ir para o conteúdo principal

Nintendo's first 3DS handheld device released February 2011, identified by model number CTR-001.

459 Perguntas Visualizar todos

Did I mess it up beyond fixing?

I took off the back of my 3DS to look at the insides tonight to check it out. I thought I was careful enough to not mess things up, but when I was closing it back up, I found this little metal piece on my mat.

Block Image

Did I break something irreplaceable? Because that wasn't there before I opened the backside up.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Pergunta mais útil

The beoken off piece looks like an antenna connector thar came off with a little bit of the circuit board. Unless you know microsoldering, I don't think you can repair it yourself.

Esta resposta foi útil?

Pontuação 1

3 comentários:

I still wonder how/if it'll affect powering on/game play. If it is wi-fi related, then hopefully it'll still work, as I don't have plans of trying to connect to another ds console. It doesn't have a charge right now since it had been years since it was last played and I'm waiting for a replacement charge cord. I did remove a considerable amount of lint from the charge port.

por

@alexciareynolds If it's just related to the Wi-Fi antenna, it might still work. I would try it and if it doesn't work, don't replace any components.

por

@andrewsawesome I got a charge cord and everything seems to work, including wi-fi, however it doesn't charge unless I jiggle and hold the charge cord at odd angles, which is its major problem to begin with. I think I'll take time from it before trying to fix it. I saw a guide somewhere that mentioned aluminum (foil?) tape and a heat gun to attempt having the port have a better connection.

por

Adicionar um comentário

Adicionar a sua resposta

Alexcia Reynolds será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 5

Duração total: 51