Rep: 13
1
hey,
so my kids somehow managed to get water inside the digitzer, i tore the device down and its solely the digitizer from the inside, i have let it sit with some silica gel for 10 hours already but there is no sign of the moisture disappearing, i was wondering if i could heat it up with a heat gun/hair dryer so it evaporates faster
thanks
Esta é uma boa pergunta?
Rep: 26 mil
205
22
38
Hi
I wouldn’t recommend heating the display as you will most likely burn the glue in between the layers
Unfortunately you may have to buy a new one unless you want to take a gamble
You could also try and disassemble the backlight as that’s where most of the water will gather but please do this at your own risk
Hopefully this helps
Any questions please ask
Thanks:-)
Esta resposta foi útil?
the thing is, its not the LCD its the digitizer i was wondering if i could heat it up
If you use heat below 120deg c you might get away with it
Probably needs replacing though
I would attempt at your own risk:-)
alright thank you ill try my luck
Últimas 24 horas: 2
Últimos 7 dias: 2
Últimos 30 dias: 3
Duração total: 37
