Ir para o conteúdo principal

13" aluminum unibody, 2.0 or 2.4 GHz Core 2 Duo processor.

574 Perguntas Visualizar todos
Pergunta encerrada

LCD Backlight does not work!

My problem began with a "no airport card" issue that came up from nowhere. I ordered an airport card and replaced the one I thought was defective with the new one. I finished assembled everything back according to this MacBook Unibody A1278 Once done, I powered up my MacBook. To my surprise, the screen was not lighting up. I first thought it was dead but upon a bit of luck, coincidence and research, I held up a flashlight and saw it was working. Since then, I have tried researching everything about this model (A1278) and have yet found an answer. I don't know where to look and therefore don't know where to start solving this second problem. I also connected the MacBook to my external monitor and hardware wise (except airport card and backlight), functioned correctly. I'm short on money right now so I don't have the $$$ to send it out for repair. I usually perform all my repairs on broken items (I don’t usually break stuff).

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0

1 comentário:

Have you checked all your connections?

por

Adicionar um comentário

1 resposta

Hi Sergio,

No back light on the screen is usually connected to faulty or disconnected inverter, I had the same thing happen to me when I was changing the logic board on my MacBook. Is it possible that you disconnected the inverter when you were replacing the airport card?

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 702