Conserte seus objetos Comunidade Loja

Repair guides and disassembly information for the MacBook Pro 16'' released in November of 2019. Model A2141, EMC 3347.

211 Perguntas Visualizar todos

Opções

What other parts are required to replace the touchbar?

Hello , recently I'm having issue that my MacBook Pro 16" 2019 keeps shutting down or restarts by it's own. I have another problem too where the Touchbar keeps flickering and blank buy it's responding. I went to the apple store they said it's not the logic board problem. It's the touchbar , where the top case need to be replaced. Can I know what other parts are required to replace the Touchbar ? Thank you.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas

Opções

Well… Apple loves making things hard! Sadly, it’s not a simple. The TouchBar is glued down to the uppercase quite well. I’ve used solvents and heat taking a few hours to get it off in the older 2016/17 models when I was able to get my hands on the part.

Frankly, the 16” part is about $150 USD getting a uppercase I think is the better direction today. First your battery is getting close to four years, your keycaps are likely a bit worn as well. A used uppercase can be had for $300 USD a new one from Apple is about a hundred more with a fresh battery.

But, I’m not sure you need a new TouchBar. Often the driver logic which is located on the cable is the problem.

Esta resposta foi útil?

Sim Não
Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Saabiresh Letchumanan será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Duração total: 43