I have an Iphone se 2020 and I'm currently attempting to fix the camera. I have a new camera module ready to be installed but the metal cover over the camera is held down by two standoff screws. I don't have a standoff screwdriver and I cannot Offord one. Any ways to remove the Standoff screws without a Standoff screwdriver?
Esta é uma boa pergunta?
Rep: 599
9
9
13
The thick ones with the cross on the top with the threads in? Just use a small flat screwdriver and go slowly. I repair mobiles and that’s what I used to do before I got the correct driver.
Esta resposta foi útil?
Rep: 1,6 mil
6
8
i got one of these https://www.amazon.com/gp/product/B08DHV... for $20.
there are others with a different variety of bits and it's not just for iphones. everyone who tinkers with stuff should have a good small screwdriver kit. truth be told i've only use 5 different bits, but if i have future needs, for specialty screwdrivers, this should cover it.
Esta resposta foi útil?
Últimas 24 horas: 1
Últimos 7 dias: 8
Últimos 30 dias: 25
Duração total: 307
