Ir para o conteúdo principal

I spilled lemon oil on my dryer went down the back crack blew breaker

ELECTRIC DRYER!!! I waited a day and plugged the dryer back in then reset the breaker and it immediately popped off again. I waited 2 more days, same thing. I took the top back off and saw a black mark where the oil dripped down a wire. I cleaned the oil off and painted on the burn, but it still pops off! I need to take the bottom back off and clean the oil and see,,,,!!!?I don't know what to look for?!!! Plus, I don't know what to do when I find something! HELP PLEASE!!!

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

Was the black mark on the wire or on the circuit board the wire connects to? The oil may have damaged the board, probably the control panel.

Esta resposta foi útil?

Pontuação 2

1 comentário:

Christopher Sean Harris, as soon as I read your question I realized there was a control panel! I found a video online and cleaned all of the parts that were cleanable. It works now!!! Thank you so much! Never would have gotten there without your question. If it blows up again, I will be back!

por

Adicionar um comentário

Adicionar a sua resposta

Jayme Farrar será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 3

Últimos 30 dias: 7

Duração total: 42