Rep: 1
1
So I have this Mac and it’s working kind of.
I have noticed that with the LCD connected it won’t boot at all. However with the screen disconnected and using a separate display it boots and works
is this an LCD flex issue or panel issues? Or could this be something else ?
Any advice is hugely helpful.
Esta é uma boa pergunta?
Rep: 480,9 mil
35
330
971
Well, it does look like the logic board connector got a bit of a tug as the detent tabs are bent as such the connector might not be making good contact with the cable. I would press the tabs back down with the cable in place so you don't go to far as the shell metal is very soft and can break off. I would also slide a spudger across the connector pressing the shell inwards a bit without the cable connected. Trying to add a bit more tension on to the cable. It doesn't take much to fix so don't go to far. Otherwise its time for a new connector.
Esta resposta foi útil?
Thank you dude. I have a new connector ready to go in.
How could a bad LVDS stop it booting?
@Marc Webb - I'm thinking there's a short somewhere, as you implied it boots up without the display present. It could be within the connector or in the display assembly its self.
Últimas 24 horas: 0
Últimos 7 dias: 1
Últimos 30 dias: 2
Duração total: 65
How about posting some nice clear tight images of the logic board connector at a few different angles as well as the cables connector so we can see if either is damaged. Adicionar imagens a uma pergunta já existente
por Dan
Pics added to the post
por Marc Webb