J9001 something inside blocks my cable connector

You need a new connector at its physically damaged. There is no means to make this work as the socket pins are a fork type. While you might be able to insert the cable end it won't make electrical contact with the mating connections.

As much as I would love to offer you a magical answer to make this work I just can't (nor anyone else can either).

Esta resposta foi útil?

Sim Não

Pontuação 0

1 comentário:

Thx Dan. Soldering on such very narrow space is like launch a rocket to the moon to me... Cannot shake hands, must have eagle eyesight... I will try buying some used tools to fix it asap. Thx your insights and selfless sharing. U give me a hope.

13 de jun de 2022 por pmp calvin

Adicionar um comentário

Thx Dan. Soldering on such very narrow space is like launch a rocket to the moon to me... Cannot shake hands, must have eagle eyesight... I will try buying some used tools to fix it asap. Thx your insights and selfless sharing. U give me a hope. — pmp calvin

pmp calvin @ninjasdu Rep: 65 4 · Answer 1 · 2022-06-17T22:56:03-07:00

pmp calvin @ninjasdu

Rep: 65

4

Postado: 17 de jun de 2022

Opções

Hi Dan,

I fixed it.

After purchasing the original logic board connector from taobao, I realise that a quick fix is to remove the front cover, and erect the 6 pins upright 90 degree to the floor.

The board connector & cable connector at J9001 eventually fits to each other firmly.

My solder skill too poor. I am too poor to buy a professional hot wind gun. The above solution is quite happy to me.

Thanks Dan. I posted my previous wrong thoughts and my final outcome. Just use a mini 1-shape screwdriver to erect the pins...fixed it...the pins were tilted to screen side (as opposed to electric power back side ) due to screen drop onto desktop.

Esta resposta foi útil?

Sim Não

Pontuação 0

Adicionar um comentário

iMac Intel 27" EMC 2429

J9001 something inside blocks my cable connector

Update (06/13/2022)

2 respostas

Adicionar a sua resposta