Model A1199 / 2, 4, or 8 GB capacity

99 Perguntas Ver todas

Why is there a "do not disconnect" logo on my screen

We just bought a used iPod and there is no booklet with it. When I plugged it in to my computer via a USB connector there is now a sign blinking and saying "do not disconnect". Is there a problem???

Thanks

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 2

Comentários:

i am using 7th ipod nano and it says okay to disconet but it just stays there i tried reseting it and puting it on disk mode not of this worked

por

Adicionar um comentário
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

4 Soluções

Solução escolhida

it has a do not disconnect on it because your iPod is trying to talk to the computer. If you disconnect it without first removing it from the computers desktop you can corrupt both the iPod and the computer.

Go to : http://support.apple.com/manuals/#iPod and locate your iPod and download the manual.

Take care

Esta resposta foi útil?

Pontuação 5
Adicionar um comentário
Resposta Mais Útil

This is normal. There is not a problem. You simply have to go into your iTunes program and 'eject' the iPod. The eject icon is a triangle over a bar just to the right of where it lists your iPod on the left column in iTunes.

Roll your cursor over the triangle and press once. After just a couple of seconds, your iPod will be ready to disconnect and the "do not disconnect" logo will disappear.

Good luck,

Frank

Esta resposta foi útil?

Pontuação 10
Adicionar um comentário

@debbie

Make sure you use iTunes, and connect your iPod.

Select your iPod in the navigation panel on the left, Devices section.

Now use the Music button in the top menu.

Select to synchronize only "Selected playlists".

Only the tracks used in the selected playlists will be synced to your iPod.

The other tracks in your music library will not appear on your device.

Esta resposta foi útil?

Pontuação 3
Adicionar um comentário

toggle hold switch 5 times, then hold center button and menu button at same time for 10-20 seconds. Sounds crazy, but it worked for me!

Esta resposta foi útil?

Pontuação 2

Comentários:

Thank you for sharing this! It worked for me too! I didn't want to have to recover and reset it.

por

but this happens every time i connect it

por

Adicionar um comentário

Adicionar a sua resposta

Lee será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 15

Últimos 7 dias: 88

Últimos 30 dias: 337

Todo: 16,855