Rep: 11
1
I’ve got a couple of stripped screws on my Apple Watch (original series) that I am trying to replace. The iFixit website sells a set of these screws (IF308-017-1) but they are out of stock and have been for at least a month. If I could get the description of each screw I could purchase each individual screw that I need. Example screw description = M1x2 mm.
Esta é uma boa pergunta?
Rep: 479,6 mil
35
329
971
The iFixit screw set was assembled by someone taking the time to strip down a watch for its parts. Sadly, the demand for the screws for this series of watches is just not there. The best you can do is locate a junker to do the same stripping it down to get the needed screws to fix yours.
I don’t know of anyone still fixing this series, so getting a listing of the screws sizes even from Apple is not likely to happen and most are custom screws not something you can locate from other sources.
Esta resposta foi útil?
Thanks Dan. I was afraid that’s the answer I would get. For now I’ll keep taking it apart (if I can ever get those stripped screws out). I have an Apple Watch 6, so when the battery went bad on my old one I decided to repair it. It’s mostly a learning project, so it won’t be the end of the world if I don’t fix it. But I sure hope someday I do fix it. Lots of good learnings so far with this project.
Últimas 24 horas: 0
Últimos 7 dias: 1
Últimos 30 dias: 4
Duração total: 55
