Ir para o conteúdo principal

27" display with 2560 x 1440 pixels resolution Thunderbolt & MagSafe cable attachments

160 Perguntas Visualizar todos

The monitor worked fine, then suddenly made a pop and now its dead

This is not related to the common periodic flickering and then the screen going dead until you unplug it and plug it back in. That was another Thunderbolt display that I fixed with new cables. This one made a loud POP and then went dead. There was no problem or issue prior. I’ve tried a different power cable, but that still didn’t help.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
1 comentário

@chunnel - Time to do a bit of careful inspection of the logic board and power supply for a blown capacitor! You should be able to see a burnt component.

por

Adicionar um comentário

1 resposta

Pergunta mais útil

I think the power supply died,

[produto vinculado ausente ou desativado: IF359-001]

Esta resposta foi útil?

Pontuação 1

2 comentários:

Thank you. I had that same thought. You seem to be out of stock so I purchased it for the same price on Amazon. I'll let you know if it works.

por

Alright :) i hope it works

por

Adicionar um comentário

Adicionar a sua resposta

Bryan Karlan será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 8

Duração total: 95