Ir para o conteúdo principal

Versão maior do Nintendo DSi, lançada em março de 2010 na América do Norte. A maioria dos reparos é realizada apenas com uma chave de fenda e ferramentas de abertura.

156 Perguntas Visualizar todos

Power connector pulled off motherboard and metal pieces are missing.

Block Image

Hi, my problem is that I removed the power cable and the connecter on the mother board came off with the power cable. The metal bits connected to the power connecter have came off and I no longer have then. Is their anyway I could fix this?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

You could

  1. Take the connector off and solder both wires directly to the motherboard, or
  2. Salvage the metal bits of another connector(from scrap electronics), insert those pins into the holes on this connector, zolder the pins onto the motherboard (slide the plastic piece up), slide the plastic piece back down, and reconnect the needed components.

Esta resposta foi útil?

Pontuação 2

1 comentário:

Thankyou so much!!!

por

Adicionar um comentário

Adicionar a sua resposta

brittdunn será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 6

Duração total: 214