I recently bought this mac, and I wanted to factory reset it. While it was rebooting, I accidentally unplugged it and the screen has not turned on since. I tried to do a PRAM reset, but it did not respond. I have tried to make a bootable disk, but that dod not work either. The fans spin and I think the magic keyboard connects to it but the screen stays black.
Esta é uma boa pergunta?
Rep: 479,3 mil
35
329
971
See if you can boot up in Safe mode, press Shift (⇧) key during startup
Reference: Mac startup key combinations
If that fails time to visit an Apple Store
Esta resposta foi útil?
Rep: 685,3 mil
3,4 mil
1,1 mil
2,6 mil
Try using a wired USB keyboard (any will work), The driver for the magic keyboard probably is not loading. Then try rebooting in Recovery Mode and run Disk Utilities.
Esta resposta foi útil?
Thanks for the response! Sadly, I tried this and the screen still stays black.
with the wired keyboard try Dans solution. that failing do a SMC & PRAM reset
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 1
Duração total: 52
