Replaced the jack cable, but now when I lightly touch or press the upper left corner area it puts the phone into silent mode or vibrates (turned off now b/c that got annoying fast).
Everything is in place and aligned, can't see anything that would be touching or causing this. Compared to another 3GS and everything looks the same (in place).
No idea what's causing this?
Esta é uma boa pergunta?
Rep: 77,1 mil
337
104
145
put mute switch on flex in down position is easiest for getting alignment right. Check you have mute button on right way (dot at top near screen) should only really fit in that way but it can be put in upside down and then the mute switch has no "groove" to keep it in place.
Esta resposta foi útil?
How exactly should you remove and re-insert the switch?
Rep: 961
8
8
1
The only thing it can be is the alignment of the tab that inserts into the outer switch. If it's off ever so slightly it will do this. That's the worst part (in my opinion) to remove and put back.
Good luck
Esta resposta foi útil?
I don't understand what you are referencing iDoctor. Could you be more specific please? I have an iPhone 6 SE
Many thanks
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 2,112
2 comentários
I can't be the only one that's experienced this?
por chris
I am having the same issue
por Candy