3 
1 iPod No power after repair
So I'm fixing my girlfriend's sister's iPod. I have done these many times before, just a cracked screen.
So after I replaced it everything went fine. She told me a few days later that the home button has stopped working. So I just took off the new touch screen to take a look. when I go to power it on and it seems to unresponsive.
I tried 3 cords, all usb ports on two computers. Nothing.
Did I short out the logic board?
Any help would be great.
Thanks.
Esta é uma boa pergunta?
Pontuação
0
9 comentários
check your battery has output/charge with a multimeter. The experts on ipods will know better but if the home button isn't working it may be the charging port is dead/not connected, hence not charging/syncing.
por pollytintop
Can I check it with out lifting the lcd?
por lloyd
Oh wait never mind I lifted the lcd.
por lloyd
Ok, So im getting a reading from the battery and a higher one when i plug in the charge cable.
por lloyd
Try reconnecting LCD an doing a reset. This may power the LCD back on. If it is recognised in iTunes this may be an LCD problem.
por pollytintop
Exibir mais 4 comentários