My screen has white vertical lines and is lacking of colour intensity everywhere. I already did the self diagnostic test, restarted it, reinstalled the os. I really think there is a problem with the flex cable. On ti 83 calculators it was possible to solder cables to replace the ribbon cable, is it possible on ti 84 plus ce?
Esta é uma boa pergunta?
Rep: 3,2 mil
14
13
7
Thanks for doing all those troubleshooting steps, that really helps me out!
Unfortunately, you can’t repair the ribbon cable the same way as the TI-83 family since the CE’s ribbon cable is significantly smaller (you can see it circled in the teardown). The community has been unable to find a compatible LCD you can buy separately, so the only way to get a new LCD is to buy a donor calculator. Fortunately, every TI-84 Plus CE (or TI-83 Premium CE) display is compatible with each other. Just be warned that it is not compatible with the TI-84 Plus CSE’s LCD.
Esta resposta foi útil?
Rep: 300
5
The ribbon cable is attached via a connector that has very tiny solder points. You could try just getting a new screen from another calculator with a different issue, since getting a replacement screen is almost impossible.
Esta resposta foi útil?
Últimas 24 horas: 4
Últimos 7 dias: 7
Últimos 30 dias: 32
Duração total: 853
1 comentário
What about for ti83?
por DonutLord