Rep: 11
1
hello, so the macbok does not have a backlight, it works fine via HDMI.
i have checked the board and found a blown fuse, replaced it and its still the same,
i have checked the LVDS cable and i can see that pin 1 and 2 on the retina screen connector are damaged..
can this cause the backlight not to work??
Esta é uma boa pergunta?
Rep: 480,5 mil
35
330
971
Clearly you’ve got a messed up T-CON board within the display assembly!
Here’s a snippet of your display connector. FYI: Its miss-marked as LVDS the connection is technically iDP
It might be a bad connector or the T-CON board its self. Its very easy to damage the panel and the T-CON board. Best to just replace the full display assembly.
Esta resposta foi útil?
Hello, thanks for the answer, I was looking for this schematic everywhere!
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 9
Duração total: 447
1 comentário
i have replaced the connector on the display and it works now, thanks!!
por jozef horvath