Ir para o conteúdo principal

TI-84 Plus calculator support.

38 Perguntas Visualizar todos

Why can I only see the upper part of my screen?

I turned on my calculator and only the upper half of my screen is showing. I’ve changed the batteries and reset the calculator and it is still not working. I have attached an image of my calculator for reference (I darkened the screen so the problem can be seen better).

Block Image

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

This is a classic example of ribbon cable failure. Unfortunately, unless you have a soldering iron, there’s nothing you can do to fix it. There’s a guide over on the Cemetech (calculator forum) that addresses this: https://www.cemetech.net/forum/viewtopic...

Esta resposta foi útil?

Pontuação 1

1 comentário:

Thank you for responding!

por

Adicionar um comentário

Adicionar a sua resposta

Cassandra Correa será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 8

Duração total: 226