Rep: 49
2
1
I have a Mac Pro 2013 A1481 with a suspected bad power supply, I would like to test the bus bars from the PSU to the logic board with a multimeter. Would anyone be able to provide some instructions on where to place the black (ground) probe and red probe? and what the proper voltage readings should be? Please refer to the attached photo with numbers. Much appreciated
Esta é uma boa pergunta?
Rep: 1
3
No need for that. Your Mac Pro has Diagnostic LEDs on the I/O board. The 2nd one from the top will tell you if the PSU is supplying 11V.
Esta resposta foi útil?
how will the Diagnostic LED's on the I/O board tell us? I get no power at all when I plug it in.
Últimas 24 horas: 0
Últimos 7 dias: 3
Últimos 30 dias: 12
Duração total: 919
