Ir para o conteúdo principal

Second generation of CDMA iPad 2 with 16, 32, or 64 GB and Dual Core A5 Processor. Model Number A1397. Repair is detailed and requires heat and prying.

52 Perguntas Visualizar todos

I replaced the screen on iPad 2 and I received a Black screen!

Block Image

I replaced the screen in iPad 2,3.

After that I received a black screen.

The screen is completely black as when is off.

when I turn it I have the same screen. I don’t have illuminated light. Black complete as when is off!

i checked the LCD is working with another iPad so it’s not the LCD. Also I opened the motherboard and I saw that

I there is a blown fuse. Please took a look the picture.

Can we say that this fuse was blown??? Could somebody confirm it?

could be if I replace it will began to work????

Any suggestions will be highly appreciated!

thank you

Vinnie Venkov

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

No picture. Did you disconnect the battery before you unhooked the lcd and digitizer? It sounds like you shorted the backlight circuit.

Esta resposta foi útil?

Pontuação 0

1 comentário:

Thank you Allan. Also I"m sorry for the picture, now You can see it. I had a problem to upload the picture thats why wasn't there. So do you thing this could be a problem on the picture. Also pls give advise if You know where I can buy all those small parts fuse, transistors etc, if You know. Thank You so much for Your help!!!

por

Adicionar um comentário

Adicionar a sua resposta

Vinnie será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 38