A cup of coffee spilt on my 2016 MacBook Pro with Touch Bar. We didn’t have the correct screwdriver to take it apart. Once we got it 30 hours later and took the laptop apart, it shows a lot of corrosion. Is it worth trying to fix it or should we just accept our loss? It was on when the coffee spilled and cut off fairly quickly
Esta é uma boa pergunta?
Rep: 102,6 mil
10
54
291
In my opinion it is always worth a try, one never knows, although logic board most probably suffered some damage the earlier you take care of oxides and further corrosion, the better it is. It’s still a very valuable Mac and there are several Techs around the globe who take care of component level repairs and might be able to fix damage for a fraction of the cost of a used Mac of the same series. Here’s some first aid steps that can be useful:
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 2
Últimos 30 dias: 5
Duração total: 122
3 comentários
@katiear post some good pictures of your board and the corroded area. that way we can see what you see and can probably identify the area and components which may help for further troubleshooting.
Adicionar imagens a uma pergunta já existente
por oldturkey03
@oldturkey03 added photos
por Katie
Awesome. Yes needs a major cleaning but i am with @arbaman on this one. Try to fix it first
por oldturkey03