Conserte seus objetos Comunidade Loja

Model A1502 / 2.6 GHz (Turbo Boost up to 3.1 GHz) or 2.8 GHz (Turbo Boost up to 3.3 GHz) dual-core Intel Core i7 processor with 4MB shared L3 cache.

494 Perguntas Visualizar todos

Opções

Popped DC-in Board socket off the logic board

MacBook Pro 13” Retina Mid-2014

A1502

Block Image

Block Image

Block Image

I’ve attached images to show what I’ve done.

In troubleshooting my MagSafe board, I pulled up on the board connector rather than out (I should not work on my tech when angry.) Is this something that can be fixed either myself or by a microsolder tech? Or will I have to resort to a logic board replacement?

I can get it to “sit” in the correct position (first photo), but obviously it will not stay

Thank you for your assistance - I can provide any additional details needed.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 1
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas
Pergunta mais útil

Opções

That will need to be resoldered back on, the metal legs on the plastic connector is still there so that's good to use.

Any microsoldering technician should be able to that for you.

I did this silly mistake before with a battery connector, forgot to screw battery in so battery flew out with the part.

Esta resposta foi útil?

Sim Não
Pontuação 5

2 comentários:

Lol, glad to hear I'm not the only one..

por

@benjamen50 - Courtney will need a new connector as the upper pin parts are sheared off. There are two legs per each contact the soldered part and the one above applying pressure. You'll need to find one from a junker board.

por

Adicionar um comentário

Adicionar a sua resposta

Courtney Gelety será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 3

Duração total: 86