Backlight and touch working but no image

Question

iPad Pro 10.5"

Released June 2017, the iPad Pro 10.5" replaces the 2016 iPad Pro 9.7".

145 Perguntas Visualizar todos

Michael Ritz @michael_r96

Rep: 11

1

Postado: 6 de ago de 2019

Opções

Backlight and touch working but no image

Well maybe you can help me.

The display on my iPad Pro 10.5” stays black even though the backlight is on. Sadly it is not displaying anything. The weird thing is that the backlight as well as the touch are still working (tested it with voice over).

I already tried disconnecting and reconnecting the display cables. Do any of you have an idea how to fix this?

Restore in iTunes didn‘t help either.

Thanks

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

Adicionar um comentário

2 respostas

Solução escolhida

Jeff @refurbpro

Rep: 2,7 mil

8

2

Postado: 13 de ago de 2019

Opções

Hi @michael_r96

The only thing I can think of is some type of LCD failure or graphics issue with the logic board. If you have already removed the display to reconnect the cables, then you should order a replacement screen from a trusted source to see if it will fix your issue.

Here is a part I would trust:

https://www.mobilesentrix.com/lcd-assemb...

Best of luck!

Esta resposta foi útil?

Sim Não

Pontuação 1

4 comentários:

Hi @michael_r96

The only thing I can think of is either your LCD controller has failed or the GPU on your main logic board has stopped working. If you already have the device open, I would recommend you install a replacement screen assembly from a trusted source and see if that fixes your problem.

Best of luck!

13 de ago de 2019 por Jeff

Thanks, I’ll give it a try

13 de ago de 2019 por Michael Ritz

Well I replaced the screen and since then it’s working like a charm. Looks like something on the LCD Board itself was broken

2 de set de 2019 por Michael Ritz

I've had this exact problem with now 5 premium screens from mobile sentrix and injured gadgets. Either works for a week and goes out or doesn't work at all.

22 de out de 2020 por Ender

Adicionar um comentário

Hi @michael_r96

The only thing I can think of is either your LCD controller has failed or the GPU on your main logic board has stopped working. If you already have the device open, I would recommend you install a replacement screen assembly from a trusted source and see if that fixes your problem.

Best of luck! — Jeff
Well I replaced the screen and since then it’s working like a charm. Looks like something on the LCD Board itself was broken — Michael Ritz
I've had this exact problem with now 5 premium screens from mobile sentrix and injured gadgets. Either works for a week and goes out or doesn't work at all. — Ender