Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Using the OWC Thermal Sensor Part in My Kit

I’m upgrading my mid-2010 iMac 2389 and I have the iFIXIT kit in hand.

What are the correct reassembly steps involving the OWCDIDIMACHDD09 that’s included? I know how to position the adhesive backed temperature sensor on the SSD, and where and how to attach the two strand sensor cable on the logic board. Are both or either of the three and the five strand SATA connectors on the OWC used in a reassembly employing the ICY DOCK MB882SP-1S-3B that’s included in my kit? If they are, how?

Responder a esta pergunta Também tenho esse problema

Esta pergunta é pertinente?

Pontuação 0
Adicionar um comentário

Kits para Nintendo Switch

A quick fix to get back in the game

Shop Switch Kits

Kits para Nintendo Switch

A quick fix to get back in the game

Shop Switch Kits

1 Resposta

Pergunta Mais Útil

It goes in-between the power feed cable and the drive which is held in the Icy Dock in your case. I use a different adapter frame which doesn’t offer the conversion of the connectors to the 3.5” drives alignment. I figure its one less point of failure.

Block Image

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Adicionar a sua resposta

Steven Yuchno será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 29