Rep: 1
1
Hello!
I've pouring my macbook by cola.. it's working on battery but it's won't charge (it's light green, i mean DIM green on magsafe). WHat's it's the problem? I open but in main board i don't see very much of cola, i fast get down him.. It's work in battery but when i put off battery and connect charge it's won't start..
Please help me!!!!
Esta é uma boa pergunta?
Rep: 685,3 mil
3,4 mil
1,1 mil
2,6 mil
Here's where to start: Electronics Water Damage
Esta resposta foi útil?
Yeah i doing that.. But it's won't charge.. I get off charge module and in it its some cola but i clean this.. I try to use WD40 in charge module , what you think?
The WD 40 won't help at all. After you've gotten it cleaned up, you may need to replace the DC-IN board, here's how: MacBook Unibody Model A1342 MagSafe Board Replacement
Here's the part: MacBook Unibody (A1342) MagSafe DC-In Board
I get off dc... But you think it's DC-IN problem? The charge light it's very light.. I mean DIM green when i connect charger.. IN magsafe.
I from Poland.. In Poland i find this for 50 zł, it's 15-20$...
Disconnect the DC-IN and see if it will run off the battery. If so, replace the board.
Rep: 1
1
Yeah i doing that.. But it's won't charge.. I get off charge module and in it its some cola but i clean this.. I try to use WD40 in charge module , what you think?
Esta resposta foi útil?
Rep: 1
1
Okey. I try change DC-IN and doesn't help...
Esta resposta foi útil?
Rep: 1
1
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 0
Duração total: 398
