No chime, black screen, white light steady

Question

iMac Intel 24" EMC 2111

Model A1200 with 2.16 or 2.33 GHz Core 2 Duo processor

113 Perguntas Visualizar todos

s m @l6bmwbeezgg51td

Rep: 21

2

1

Postado: 9 de jul de 2011

Opções

No chime, black screen, white light steady

Hi guys,

If iMac is off, but power is plugged in, number 1 diagnostic LED is on.

If iMac is on, no chime, fans go max, black screen, white light stays steady and number 1 and 2 diagnostic LEDs are on.

If LCD unplugged and external monitor plugged in, can't turn off, it turns right back on, once external unplugged, it turns off.

Also tried with detaching everything (add on cards, hard drive, etc.), no results.

Maybe the power supply? Hope its not the logic board....

Any ideas?

Thanks!

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação -1

Adicionar um comentário

3 respostas

Solução escolhida

mayer @mayer

Rep: 685,7 mil

MacHale Enterprises

3,4 mil

1,1 mil

2,6 mil

Postado: 9 de jul de 2011

Opções

LED Startup Sequence

LED #1 = Power available.

If no LED is visible:

• Verify AC source

• Verify known-good AC cable is connected

• Verify cable connection between AC inlet and power supply

• Verify cable connection between power supply and logic board

• Verify power supply

LED #1 + LED #2 = Power available, and system is powered on.

If second LED is not visible when power button is pressed:

• Verify power button connection to logic board

• Verify power button functionality

• Verify cable connection between power supply and logic board

• Verify power supply

• Verify logic board

LED #1 + LED #2 + LED #3 = Power available, system is powered on, and video card found.

If third LED is not visible after power on:

• Verify that MXM video card is seated properly

• Verify logic board

Esta resposta foi útil?

Sim Não

Pontuação 3

5 comentários:

Thank you for the prompt response.

• Verify logic board

What kind of tool is required for that?

Thanks.

9 de jul de 2011 por s m

Exchanging the logic board with a known good one. Remember these instructions are for an Apple tech sitting there with all the resources in the world at his fingertips.

9 de jul de 2011 por mayer

Thank you, so if third LED is not on, most likely logic board.

9 de jul de 2011 por s m

Logic board or video card. I don't remember if this video card can be changed or not. I would check with these folks on a board repair: http://www.dttservice.com/imacintel.html

9 de jul de 2011 por mayer

+ Good Kung Fu

30 de ago de 2011 por ABCellars

Adicionar um comentário

Thank you for the prompt response.

• Verify logic board

What kind of tool is required for that?

Thanks. — s m
Exchanging the logic board with a known good one. Remember these instructions are for an Apple tech sitting there with all the resources in the world at his fingertips. — mayer
Thank you, so if third LED is not on, most likely logic board. — s m
Logic board or video card. I don't remember if this video card can be changed or not. I would check with these folks on a board repair: http://www.dttservice.com/imacintel.html — mayer