Ir para o conteúdo principal

Guias de reparo e desmontagem para micro-ondas da Kenmore.

182 Perguntas Visualizar todos

Microwave shuts off intermittently, already replaced door switch assem

I have a model 401.80082700 serial 725MM00044. Intermittent problem. Microwave goes through heating cycle and then totally powers off…no display, no light, no power. After 15-30 seconds the display comes on and instructs to press clock and reset time of day. After doing so the microwave is fully functional and may operate several times before powering off again. Occasionally the display appears fainter than normal, esp the center of display. I have replaced the door switch assembly but after several days the intermittent problem has returned. What do you think? TY

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 3
1 comentário

After much delay and frustration I ordered and replaced the control board…..works great…..thanks for your recommendation!

por

Adicionar um comentário

2 respostas

Solução escolhida

Sounds like the problem is the control board, not the door assembly. Try replacing the main controller circuit.

Good luck!

Esta resposta foi útil?

Pontuação 1

1 comentário:

I have the same problem with my Kenmore microwave. Is this the part I need? https://www.searspartsdirect.com/product...

por

Adicionar um comentário
Pergunta mais útil

There are two parts to that door switch, here they are on your model along with how to test them:

https://www.repairclinic.com/RepairHelp/...

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Adicionar a sua resposta

Ken Thome será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 9

Duração total: 1,034