SOLUCIONADA: Power to main brushes not working. - Shark IONFlex 2X

Power to main brushes not working.

I have a connection to the hand held brush, But not a good connection to main vacuum cleaner brush. The main part of the Hoover isn't making a good connection to the long pipe to drive brush.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 1

Postado: 2 de abr de 2019

Opções

If your Shark vacuum stops moving suddenly during use, see the Shark ION Robot R75 Stops Moving Unexpectedly problem page for possible problems and solutions.

First check to make sure all the connection terminals are clean, if they are all making contact check to see if your motor is blown. A multimeter read on the bottom of the head will ensure the connections are good.

Esta resposta foi útil?

Sim Não

Pontuação 0

Adicionar um comentário

Shark IONFlex 2X

Power to main brushes not working.

1 resposta

Adicionar a sua resposta