Rep: 949
12
14
1
Hi, can someone tell me the value (Ohms) of R1103 Resistor near the audio IC. I removed the Audio IC to make a jumper on C12 ( R1103) resistor but the R1103 is missing so i need to know if i can make a jumper without the resistor (If the value is around 10 Ohms)
Esta é uma boa pergunta?
Rep: 159,8 mil
11
191
368
According to the schematic it is a 33.2 ohm resistor.
Esta resposta foi útil?
i was thinking that but wasn't sure if it was 33.2 Kohm or 33.2 ohm
If it was kiloohms the decimal point shouldn't matter as the value being 0.2 khms off wouldn't really cause any problems on a circuit.
The ones labelled 0 ohms also are written on the schematic as 0.00 ohms so it should be okay.
Últimas 24 horas: 0
Últimos 7 dias: 8
Últimos 30 dias: 11
Duração total: 593
