Ir para o conteúdo principal

Repair guides and support for top and front loading Whirlpool brand washers.

421 Perguntas Visualizar todos

How to fix Whirlpool top load washer out of ballance problem

Whirlpool /Maytag washer model MTW5840TW0 works great, except on the drain and spin cycle. The drum starts to spin and the water drains. Once all the water has drained the drum goes out of balance and hits the cabinet. What could be the problem? I’m thinking its the suspension springs, but just by visual inspection they are not broken or rusty.

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 3
1 comentário

This question was migrated from https://meta.ifixit.com/Answers.

por

Adicionar um comentário

2 respostas

Solução escolhida

There about 12 causes for this but it is usually a bearing. Here’s the list along with replacement parts:

https://www.repairclinic.com/RepairHelp/...

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

I have a whirlpool WTW7500GC2 washer that suddenly started vibrating more than usual. I have taken the top off all the suspension springs are intact and do not look damaged. I have purchased them, and will replace them anyway. Is there anything else it could be

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Phillp Saxton será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 32

Últimos 30 dias: 158

Duração total: 9,052