Ir para o conteúdo principal

Model A1311 / Mid 2011 / 2.5 & 2.7 GHz Core i5 or 2.8 GHz Core i7 Processor

479 Perguntas Visualizar todos

Why does the cooling fan always run at maximum speed

I recently replaced the original hard drive with a solid state unit. Since then, the cooling fan begins at low speed as usual, but very quickly reaches maximum speed and remains at that speed until I restart the computer. Prior to the new hard drive, the fan never went past low speed.

Responder a esta pergunta Também tenho esse problema

Esta pergunta é pertinente?

Pontuação 1
Adicionar um comentário

2 respostas

Pergunta Mais Útil

I don’t recommend software solutions as they’ve been shown to not be as good and people tend to misuse them killing their system.

The proper way is to install OWC In-line Digital Thermal Sensor for iMac 2011 Hard Drive Upgrade

Esta resposta foi útil?

Pontuação 3
Adicionar um comentário

Did you replace the temperature sensor when you upgraded to the SSD? If you didn’t that would cause the fans to max out. You can also use this program that another iFixit user used to control the fan speed of your Mac.

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

loudanzico será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 54