Rep: 193
3
9
Hi all,
Changed the screen on a ipad air 2, which you need to remove the touch id home button & flex from the old/damaged screen to place on the new, but after doing so the touch id no longer works, I have double checked the connectors, flex etc and see no signs of any damage so not sure what else to check.
Esta é uma boa pergunta?
Rep: 175
3
Have you tried it with the original screen to see if it works?
Esta resposta foi útil?
Rep: 1,6 mil
7
6
5
Unfortunately the most likely situation with this iPad is that the home button was damaged when it was removed from the original screen, and this cannot be repaired. If it does not work as a home button you can either replace it or use the 5 finger gestures.
Esta resposta foi útil?
Note, the replacement button will only act as a home button, not touchID
Últimas 24 horas: 0
Últimos 7 dias: 8
Últimos 30 dias: 13
Duração total: 428
