KD-55X8005C no power when LVDS cable is plugged into main board
i have a SONY KD-55X8005C and last week all of a sudden it went off with no power, i replaced the power board and t con board and had constant green/orange blinking
ive done the latest update via usb update which seemed to go ok but after it had finished it wouldn’t power again.
after tinkering around i have found out that if i disconnect the LVDS cable from the main board all powers up, backlights lit up sound etc but obviously no picture
i actually now think my original power board and tcon are ok because i have tried with both of them again and getting the same.
could it be the LVDS cable or the main board
any suggestions would be greatly appreciated
Esta pergunta é pertinente?