Rep: 13
1
The water line broke near the hinge in the Freezer door and I need to replace. I removed the face plate of the dispenser, removed the circuit panel, removed plastic cover , removed the 12 screws around the dispenser unit. However the unit will not come out it appears to be still attached somehow. I can’t find any more screws that need to be removed.
Esta é uma boa pergunta?
My line broke right under the freezer door where it curves. I tried to pull it out to put a connector on, but it broke off. I wound up getting an elbow from Home Depot where one end was able to be pushed into the water line. The elbow had a connector which I was able to use some tubing to connect to the main water line, but I had to add a reducer connector to the main water line to make it work.
Now my flab in the ice chute is broken and I am trying to get the façade off. I did find one little slot on the bottom left and i used a small screw driver and have the left bottom side off. Going back to get the whole thing off - hope its not too hard.
Esta resposta foi útil?
Últimas 24 horas: 1
Últimos 7 dias: 3
Últimos 30 dias: 10
Duração total: 25
