Pular para o conteúdo principal

Huawei's 2016 flagship smartphone. Features a unibody case and dual rear-camera setup developed in partnership with Leica. Comes in 32/64 GB storage options and six different finishes. Model numbers EVA-L29, EVA-L19, and EVA-L09.

60 Perguntas Ver todas

Vibration stopped after battery replacement

Hi guys,

I swapped out the battery in my wifes Huawei P9 last night but now the vibrate function has stopped working. From the reassembly video (How to reassemble Huawei P9 after whole teardown?) it looks like this is just a small button cell battery with connectors that sits underneath the main phone battery. Is it most likely a case of this having broken contact when I was reassembling? Don’t have the phone in front of me so can’t check until later :D

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

iPhone X Fix Kits

Warranty up? No worries, we’ve got the fix.

Comprar agora

iPhone X Fix Kits

Warranty up? No worries, we’ve got the fix.

Comprar agora

1 Solução

Hi,

after you check if there is no setting that is preventing the vibration you’ll need to reopen the phone.

The vibrator has to simple coper connectors that are pushed to their counterparts on the motherboard. clean these connectors and check the flex cable. Make sure (at reassembling) that these make a good connection. Peek under the motherboard a little.

After reassembling, test if the function works.

Btw, replacing the battery should not have an effect on the function of the vibrator.

Kind Regards, Brenda

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

sjhzbx será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 11

Todo: 49