power surged and then the e2 f2 code started flashing

Question

Dishwasher

Repair and disassembly guides and support for dish washing appliances.

705 Perguntas Visualizar todos

deew1015 @deew1015

Rep: 13

1

Postado: 25 de out de 2018

Opções

power surged and then the e2 f2 code started flashing

My dishwasher is only about a year and a half old. We had a bad storm yesterday...my power surged and then the e2 f2 code started flashing. Did the reset, took the door off and checked connections...still flashing. Do I randomly start buying parts? How do I check to see if it’s something I can fix? I am handy, but appliances are new territory for me. All info. is appreciated.

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 1

2 comentários

We have the same model and issue, did you come up with a solution

2 de jan de 2019 por Clay showalter

I have the same model and same problem. Did you get it fixed?

2 de fev de 2019 por Rabin Shrestha

Adicionar um comentário

3 respostas

We have the same model and issue, did you come up with a solution — Clay showalter
I have the same model and same problem. Did you get it fixed? — Rabin Shrestha

mayer @mayer Rep: 685,3 mil MacHale Enterprises 3,4 mil 1,1 mil 2,6 mil · Answer 1 · 2018-10-25T06:23:27-07:00

Pergunta mais útil

mayer @mayer

Rep: 685,3 mil

MacHale Enterprises

3,4 mil

1,1 mil

2,6 mil

Postado: 25 de out de 2018

Opções

The e2 f2 error usually means main control board is not getting correct signal from the user interface. Turn off power/breaker, remove screws holding inner door liner, remove liner and check/secure/clean all wire connections from front interface and main control board. The number you gave me an oven, please check it for accuracy.

Esta resposta foi útil?

Sim Não

Pontuação 3

Adicionar um comentário

Abrsvc @abrsvc Rep: 4,1 mil ABR Services 3 2 · Answer 2 · 2018-10-25T04:46:18-07:00

Abrsvc @abrsvc

Rep: 4,1 mil

ABR Services

3

2

Postado: 25 de out de 2018

Opções

In cases like this, the control module has been effected. This can be as simple as an open internal fuse or more complicated like a smoked controller IC. In either case, knowing the exact make and model is critical. Please update this with the make and model. Also, a Google search of the model number and the keyword “parts” should get you to a site to check for parts availability. If you can post a picture of the control module, we may be able to see a damaged part that can be replaced as a start.

Dan

Esta resposta foi útil?

Sim Não

Pontuação 1

1 comentário:

Thank you. I’m adding a comment below with some pics.

25 de out de 2018 por deew1015

Adicionar um comentário