AK PRO 5 in1 Laminating Machine Bubble Problem

Question

iPhone 7

Lançado em 16 de setembro de 2016. Modelo 1660, 1778 Disponível como GSM ou CDMA / 32, 128 ou 256 GB / Ouro Rosa, Dourado, Prateado, Preto Mattte e Preto Brilhoso.

2264 Perguntas Visualizar todos

AGS @ags_studio

Rep: 243

6

22

Postado: 6 de set de 2018

Opções

AK PRO 5 in1 Laminating Machine Bubble Problem

Hi Everyone.

I bought AK PRO 5 in 1 for Laminate iPhone Broken LCD.

The problem is the Bubble.

I try it with same Parameters suggest form reseller, but the problem is same.

I change the temperature do different setting but the problem is same.

Is someone use a same machine who suggest me something…

The setting I use is :

Vaccum Time : 15 SEC

Lamination Time 15 SEC

Outgassing Time : 5 SEC

Debubbling Time : 6000, SEC

Temperature : 40 C.

The Modul who i use when i put the LCD inside the machine black (check the PIC)

Thanks

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não

Pontuação 0

4 comentários:

I

have same problem but i use 4in1 glasses and i always get pressure bubbles. Any ideas why ? I use same akpro.

7 de jul de 2019 por arnasseip

I have the same problem with Ak pro. Always I have bubbles, with frame, without frame, 3 in 1, 4 in 1. I don’t know why. Thanks to any recommemdation

17 de dez de 2019 por David Alonso

I am having problems with my AK pro machine, it no longer lock and there is no pressure in the machine

22 de nov de 2023 por Collins Ilondu

perhaps you have problem whith inside pump

27 de nov de 2023 por Marco

Adicionar um comentário

1 resposta

I

have same problem but i use 4in1 glasses and i always get pressure bubbles. Any ideas why ? I use same akpro. — arnasseip
I have the same problem with Ak pro. Always I have bubbles, with frame, without frame, 3 in 1, 4 in 1. I don’t know why. Thanks to any recommemdation — David Alonso
I am having problems with my AK pro machine, it no longer lock and there is no pressure in the machine — Collins Ilondu