the 2 screws on the back panel closest to the center front on my lenovo yoga 2 13 spin, but they don’t come out and keep the back panel locked in place. they have a tiny bit of resistance and feel like they step 12 times per revolution. could the standoffs have broken off allowing the screw to spin but preventing it from unscrewing? do i have to cut the panel open?
Esta é uma boa pergunta?
Rep: 479
6
2
1
They most likely have brackets on the back. Unscrew it as far as you can then give them a gentle pull.
Esta resposta foi útil?
Últimas 24 horas: 0
Últimos 7 dias: 7
Últimos 30 dias: 23
Duração total: 863
