Conserte seus objetos Comunidade Loja

Repair information and troubleshooting for Craftsman-brand riding lawnmowers.

553 Perguntas Visualizar todos

Opções

blades diaengage and battery dies

Hello, I have a craftman 46 inch pro series riding lawn mower. It wouldn't start even after charging battery. Changed battery, cut 1 acre just fine, midway through the next cut the blades would disengage, engine would rev a little faster and the steering would get tough. Turned mower off and wouldn't start back. Put on charge for about 30 mins, mower started back up, ran for about 10 mins and I repeated the same process 2 or 3 more times until I finished cutting the yard. Any thoughts?

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas

Opções

Sounds like the battery is not getting charged. Check across battery terminals with it running at cutting speeds you should be getting 13.5 volts if not then the charging circuitry is to blame..

Esta resposta foi útil?

Sim Não
Pontuação 0

2 comentários:

ok, I will do that tomorrow. If its not reading 13.5 then what in the charging circuitry needs to be replaced

por

battery not charging at all

Also you need to provide model number and serial number info here and at Sears when you order the parts or we will only be guessing otherwise.

por

Adicionar um comentário

Adicionar a sua resposta

ryan sparks será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 99