When I switch the camera on, the set time and date message comes on the screen. This has to be set before the message clears from the screen. The next time the camera on you have to go through the same procedure again.
Esta é uma boa pergunta?
Rep: 169
4
1
1
I have a similar camera (A570 IS) and mine has a second type of battery right beside the two main AA ones. It’s under a cover marked “CR1220” which refers to the type of that second battery. Pull that cover up, replace the CR1220 (or whatever battery type your camera has) and that should fix the problem.
Esta resposta foi útil?
i tried that and it didn;t work
@williams679 what make and model camera? what were the issues and what did you try?
Rep: 685,3 mil
3,4 mil
1,1 mil
2,6 mil
If the battery level drops to low, a board will lose its memory. Replace the battery.
Esta resposta foi útil?
I have already replaced the batteries but problem still exists.
Últimas 24 horas: 0
Últimos 7 dias: 5
Últimos 30 dias: 16
Duração total: 771
