Ir para o conteúdo principal

Third generation of iPad, featuring 4G capabilities, released on March 16, 2012. Model number A1430. Repairs require heat and careful prying.

106 Perguntas Visualizar todos

Partially dead after replacing LCD and digitizer.

I have a problem with my iPad 3 4G.

After replacing LCD and digitizer, iPad "won't boot" up. The device looks like dead (LCD and digitizer isn't working, no sound when connected to the power supply), but after connecting to a computer, I can still sync files and charge the battery. I tried to reset (buttons still works), restoring to factory settings etc., but nothing works. I remember, when the screen was plugged out, I felt a smell from the motherboard. Is it possible to burnt something?

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

Unfortunately yes, unusual smell or noise coming from the board probably involves a shorted component, in this case, since the iPad is still recognised by Itunes it might mean something got burnt along video or backlight circuits. You'll need somebody specialized in microsoldering to take care of it, but given today's market prices for an iPad 3 it might be economically questionable.

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Adicionar a sua resposta

Keith Baudelaire será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 25

Duração total: 60