Ir para o conteúdo principal

The Zebra LP-2824 is a thermal label printer.

3 Perguntas Visualizar todos

TLP-2824 wont stop feeding blank labels

I have a TLP-2824 printer by Zebra

When powered on, the printer will not stop feeding blank labels. The only way to get it to stop is to shut off the power. I have tried doing a calibration by holding down the feed button while turning the power on, the printer will go thru the calibration steps, and the continuous feeding of the labels continues. Pressing the feed button will also cause the printer to continuous feed labels. Does anyone have any idea how I can fix this?

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Pergunta mais útil

Sounds like it's the sensor that looks for the gap in the labels. I've worked on a more industrial Zebra printer, and they have a red light near where the labels come out. If you move this towards you (i.e. to the right of the printer from the front) it can help it

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Adicionar a sua resposta

peterfang será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 18

Últimos 30 dias: 35

Duração total: 4,594