Mid 2009 Model A1278 / 2.26 or 2.53 GHz Core 2 Duo processor EMC 2326

854 Perguntas Ver todas

Scorched display connector, no backlight

http://img684.imageshack.us/i/photobju.j...

No backlight on the display so naturally I opened up to check connections first. found that the display connector appeared scorched.

Can anyone verify that this is what is causing there to be no backlight on the display?

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0

Comentários:

Please give the last three letters of your serial number so we know which MacBook you have. Thanks

por

66D is the last three

por

pple MacBook Pro "Core 2 Duo" 2.26 13" (SD/FW) Specs

Identifiers: Mid-2009 13" - MB990LL/A - MacBookPro5,5 - A1278 - 2326*

por

Adicionar um comentário

GIVE TOOLS. FIX FOREVER.

GIVE TOOLS.

FIX FOREVER.

Spread the Fixmas cheer.

GIVE TOOLS. FIX FOREVER.

Spread the Fixmas cheer.

4 Soluções

Solução escolhida

Even if your video cable connection is wrong you should get screen lightning if you're able to power the machine and boot the OS. Could you connect an external monitor and check if you have video on the external ?

Esta resposta foi útil?

Pontuação 1

Comentários:

works flawless with an external display. I can see that the issue is definitely something with the backlight. If I light through the apple on the reverse of the clamshell I can see the display is functioning properly otherwise. Wondering if it is worth trying to get my hands on another display or if I should just write the board off as damaged.

por

Adicionar um comentário
Resposta Mais Útil

I cannot determine the extent of the scorching from the photo submitted. Is the display data cable burned? Could you upload a picture of it. Step 9 of this guide shows what it should look like.MacBook Pro 13" Unibody Mid 2009 Display Replacement

How well seated was the cable? Even if we can determine if the problem is the cable or the logic board, I don't know what would cause this.

Esta resposta foi útil?

Pontuação 3

Comentários:

Sorry for the bad quality when I get home I will take a photo with my camera. All that was available at the time was my iPhone.

por

here is the close up photo, not sure if that is corrosion around that area... Did not notice that until I got some better lights and magnified on the camera. Could be what caused it. http://img848.imageshack.us/i/connector.... Definitely need to get some overhead lights in my work area...

por

Adicionar um comentário

Hi there,

I am experiencing the same troubles here - it seems the connector on the board is corroded or burnt, and no backlight as well (with all other functions working fine. The picture you uploaded is pretty much the same as my macbook.

Have you got the connector fixed? I'm wondering about whether or not i'll need to replace the entire logic board.

Cheers,

Wilson

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Hi,

I'm looking at my daughter's MacBook "Core 2 Duo" 2.4 13" (Unibody) A1278. She had a "Pepsi Syndrome" spill and now the LED back light is dead on the display. I opened the case to find that the display data cable and connector have a burned contact, which is likely the cause. Display output is functioning fine with an external monitor. I'll post pics when i get a chance.

My question is: has anyone repaired the connector on the logic board or is a replacement logic board and a new display data cable the only option?

I thought that it might be possible to jumper around the connector to make a repair. I would need a microscope, a fine tip on the soldering iron and very fine wire to do this. Any advice?

Thanks!

Jeff

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Jesse será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 5

Todo: 2,355