Ir para o conteúdo principal

Model A1288 / 8, 16, or 32 GB capacity

451 Perguntas Visualizar todos

How can I seal my iPod?

I was replacing the screen on my ipod and accidentally tore some of the rubber around the bezel. Can I seal that rip with a little electrical tape to keep the dust and water out? I don't want to have to remove the screen again and reinstall

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 1
Adicionar um comentário

2 respostas

Solução escolhida

I don't think the tape would stay put for long. I'd try a little rubber cement on a toothpick and really get it into the joint. As for keeping water out, the only way I know how to do that is put it in a plastic bag. The number of water damaged iPhones and iPods questions on this site is incredible. It's by far the most common problem and the hardest to answer.

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

annoying for sure. I asked a friend of mine about the rubber cement and his concern is that it might melt the rest of the rubber. He suggested liquid electrical tape or silicone tape might do the trick.

Esta resposta foi útil?

Pontuação 0

1 comentário:

Your friend appears not to know the difference between Plastic cement vs. Rubber cement: http://www.maybenow.com/Plastic-cement-v...

por

Adicionar um comentário

Adicionar a sua resposta

[deleted] será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 2,012